Rotary Dryer

The rotary dryer is a charcoal raw material drying equipment used for drying sawdust, grain, baggase, bamboo, and other high moisture materials.



Product Introduction:
The rotary dryer is a charcoal raw material drying equipment used for drying sawdust, grain, baggase, bamboo, and other high moisture materials. It can dry the crushed raw materials quickly with high capacity in charoal production line.

1. Designed with anti-sticky drum-wall and assembled material-lifting board.
2. The rotary dryer is divided into secondary-granulating section, balling section, polishing section and drying section, etc. Rotary drum dryer features convenient installation and transportation as a result of its flange connection.
3. This large sized rotary dryer is primarily composed of vibrating feeder, heating furnace, drying device, and air intake and air outlet device, and more.
4. With the features of low noise, less pollution and good drying effect.


Working Principle:
1. The rotary dryer consists of heating device, feeding device, transport device, discharge device, dust extraction device and other connecting parts.
2. For the installation, the rotary drum dryer should incline slightly so that the discharge end is lower than the material feed end in order to convey the material through the rotary drum dryer under gravity.
3. Materials to be dried entes the rotary dryer, and as the rotary dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the rotary drum dryer.
4. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the rotary drum dryer, passing through the hot gas stream as it falls.

Technical Parameters:

HGT-1000 x 10
HGT-1200 x 12
HGT-1500 x 14
Diameter of feed materials
0-200*240 mm
0-200*240 mm
0-200*240 mm
Working Temperature
stove 300°C
stove 300°C
Consumption of wood waste
20-30 kg/h
40-50 kg/h
Overall size
Φ1m, length 10 m
Φ1.2m,length 15 m
Φ2.2m,length 28 m
10000 kg
18000 kg